Design, Programming, Music and Life

Showing posts with label idea. Show all posts
Showing posts with label idea. Show all posts

Friday, September 25, 2015

Idea - Modular Powered Gadgets

This is one of my more recent ideas that I came up with. I was tired of events where I had to rely on battery powered gadgets, just to find out that there was no power, and no more batteries in the junk drawer, so I thought of a modular system that would allow me to see the battery level, as well as be compatible with new battery technologies in the future.
Upon also realizing the harsh reality of my ongoing economic state, I have decided to share this one with no attempts at trying to claim dibs on the idea. So here is a decent idea for any techno gurus out there with the capital to make it happen :)

The system is meant to be packaged as a pack of three battery packs, a charger, and one module of the users choice. The modules could be almost anything really, a video camera, flashlight, fan, microphone with recorder, USB charger, and many more possible modules could also be used. I just left a couple here to give the idea out.

I don't think it was a "ground breaking" idea, but it was decent enough to sketch it out at the time :) Enjoy!

Saturday, July 6, 2013

IDEA: A different take on how we record sound.

2:42 PM Posted by Unknown , , , , , , , , , No comments
When we are at a concert or listening to a guitar, we aren't just hearing a guitar, but we are hearing the guitar, the string, the reverb, and they are all coming from different places, so the sound is more pleasurable to our ears. So what we hear is analog when it comes from the guitar. Once we record that sound, we lose the quality of the sound, and it doesn't matter what medium we use to record, the sampling rate is still dependent on the medium used. Currently, we convert analog audio to digital audio in a form that uses sampling, or grabbing a snapshot of the analog wave at a certain rate per second. The way it is stored is a lot like how we store a picture too, where you will only get one sound/pixel per sample.
 
In Graphic Arts, I have learned a lot about using vector information I my graphics for scalability, and the way a vector is made is by grabbing the relative point and curve values, along with attached lie or color info. This could be done with sound too, by initially recording at a high enough ate to be able to analyze the point, frequency and curve values of a single wave. With a high enough sample rate, it is theoretically possible to be able to separate each wavelength by source and curve, allowing for a much higher quality recording, along with a much smaller file size, because all that is being stored is point values, curves and metadata.

Tuesday, December 18, 2012

Idea - GPS Enabled Gun Safety Lock


So I haven't posted any of my thoughts on the recent shooting at Sandy Hook or any of my thoughts on Gun Control as of yet. Mostly because I am tired of seeing rows and rows of posts on Facebook that only make a statement or complaint, no real proposed solutions that weren't going completely over the left wall or the right wall. It even looks as though people are afraid the Government will try to use this to take away our weapons. So I set out on a thought experiment that would allow us our rights to bear arms, while allowing us the ability to track and disable weapons if a situation arises, so this is one of the solutions I came up with, GPS enabled electronic safety lock for guns.



In this experiment, we were given a good period of time to replace most weapons on the market with ones that included an electronic safety lock. The way this works is by pushing the button, and waiting till it turns red, then you can shoot.

The Logic:
When the button is pressed, the unit sends a unique identifier and GPS coordinates through GPRS, and awaits a simple confirm or deny message. this can happen as quickly as it takes to check the time on your cellphone, so 1-2 seconds.

In some locations, the weapon would be automatically given a denied response if your weapons identifier is not authorized for that area, like Government buildings, schools, malls, etc. Other places would be given an automatic confirmation, like rural areas during hunting season, or shooting ranges, etc. The point is to allow as much freedom with your weapons as possible, but allow the ability to provide a kill-switch if needed.


Monday, October 22, 2012

IDEA: Bluetooth Tape Reciever

 
 
I have been toying with this idea for only a short period of time, the idea started with a want to get my iPhone to play music to my old school stereo, without having to leave it plugged in next to the stereo. So I thought of a unique way to make that happen using elements that already exist, so the cost is lower than it normally would be.
 
The unit is made up of a Bluetooth radio, Processor/DSP, a magnetic tape head, button, batteries and a generator. When the unit is in use, the play action of the tape player will charge the batteries and run the device. When the tape player is not running, the unit will only power the Bluetooth radio to allow for connection or reset.
Overall, its a simple design, and I haven't seen anything like it on the market as of yet, but who knows, it may already be out there somewhere. On the event it has not been produced yet, I am considering this as a Kickstarter project, so if you think its a good idea, let me know in the comments.
 
 


Thursday, April 26, 2012

IDEA - 3D Printed Business Cards


So I have been working on getting a new business card design put together, and I took a different road this time. Instead of starting with the usual PS, or Paint.NET, I started with Cinema 4D, and made my design into a model. This 3D Model can now be made in a 3D Printer. Now the benefit to this is that it has texture, it is sturdy, and it is very appealing to the eyes.

The purpose of this form factor is for advertising my mobile app skillz, I wanted to pick something that would scream that on sight. After pricing it all out using a two step method, it will come to about $4.00 a card or just over. This just means that I get to start off with a cardboard knockoff ;)
I am working on a few more ideas like this one, so I will keep you posted.